Switch on AC with Sensibo when Wireless Tag temperature is too high.
Start today
Other popular Wireless Tag workflows and automations
- Arm a motion sensor when you leave home.
- Tag senses movement and turns on Hue lightsby
- If Window/Door opened, place heating zone into Standby mode.
- When too cold, turn on heater (connected to a Wemo Plug)
- Disarm at Sunrise
- Text Me When Door Is Open
- Text Me When Too Hot
- Switch off AC using Sensibo when Wireless Tag temperature is too low.
Useful Wireless Tag and Wyze integrations
Triggers (If this)
- Tag is movedThis Trigger fires when specified motion sensor tag(s) armed in motion detection mode, have moved.
- Motion is detectedThis trigger fires when a Wyze Cam detects motion. The minimum firmware version required is v3.9.3.62 for v1 and v4.9.1.60 for v2.
- Door or window is openedThis Trigger fires when a specified motion sensor tag(s) or reed sensor(s) detect that a door or window is open.
- Sound is detectedThis trigger fires when a Wyze Cam detects sound. The minimum firmware version required is v3.9.3.62 for v1 and v4.9.1.60 for v2.
- Door or window is closedThis Trigger fires when a specified motion sensor tag(s) or reed sensor(s) detect that a door or window is closed.
- Smoke alarm is detectedThis trigger fires when a Wyze Cam detects a smoke alarm. The minimum firmware version required is v3.9.3.62 for v1 and v4.9.1.60 for v2.
- Movement is detectedThis Trigger fires when specified PIR KumoSensor detects movement.
- CO alarm is detectedThis trigger fires when a Wyze Cam detects a CO alarm. The minimum firmware version required is v3.9.3.62 for v1 and v4.9.1.60 for v2.
- Motion sensor has timed outThis Trigger fires when specified PIR KumoSensor or regular motion sensor tag detects no movement for a time-out period.
- Contact Sensor opensThis trigger fires when a Contact Sensor opens.
- Temperature is too highThis Trigger fires when a specified tag senses that its ambient temperature exceeds an upper threshold configured at temperature options screen inside the WirelessTag app.
- Contact Sensor closesThis trigger fires when a Contact Sensor closes.
- Temperature is too lowThis Trigger fires when a specified tag senses that its ambient temperature falls below an lower threshold configured at temperature options screen inside the WirelessTag app.
- Motion Sensor detects motionThis trigger fires when a Motion Sensor detects motion.
- Temperature returns to normalThis Trigger fires when a specified tag senses that its ambient temperature returns between the upper and lower thresholds configured at temperature options screen inside the WirelessTag app.
- Motion Sensor becomes clearThis trigger fires when a Motion Sensor becomes clear.
- Humidity or moisture is too highThis Trigger fires when a specified tag with humidity or moisture monitoring enabled, detects "too wet" state. Adjust the threshold from the humidity/moisture options screen inside the WirelessTag app.
- Low battery is detectedThis trigger fires when a Wyze Cam Outdoor detects a low battery status.
- Humidity or moisture is too lowThis Trigger fires when a specified tag with humidity or moisture monitoring enabled, detects "too dry" state. Adjust the threshold from the humidity/moisture options screen inside the WirelessTag app.
- Doorbell is pressedThis trigger fires when your Wyze Doorbell is pressed.
- Humidity or moisture returns to normalThis Trigger fires when a specified tag with humidity or moisture monitoring enabled, returns within normal humidity range. Adjust the upper/lower thresholds from the humidity/moisture options screen inside the WirelessTag app.
- Wyze Lock unlockedThis Trigger fires when your Wyze Lock is unlocked.
- Sensor detects waterThis Trigger fires when specified water sensor tag detects water with its resistive sensor, or when you short circuit its tip.
- Wyze Lock lockedThis Trigger fires when your Wyze Lock is locked.
- Sensor no longer detects waterThis trigger fires when specified water sensor tag transitions from detected water state to not detected water state, or when you open circuit its tip.
- Plug Turns onThis trigger fires when a Wyze Plug is turned on.
- Out of rangeThis Trigger fires when a specified tag goes out of range. Note that the system can only determine whether a tag is out of range, if the "auto-update" is enabled.
- Plug Turns offThis trigger fires when a Wyze Plug is turned off.
- Back in rangeThis Trigger fires when a specified tag comes out of "out of range" state. Only tags with auto-update is enabled can come out of "out of range" state.
- Bulb Turns onThis trigger fires when a Wyze Bulb is turned on.
- Tag Manager OfflineThis Trigger fires when the server detects that specified tag manager lost Internet connection due to power outage or Internet connection problems.
- Bulb Turns offThis trigger fires when a Wyze Bulb is turned off.
- Tag Manager OnlineThis Trigger fires when specified tag manager is back online.
- Switch turns onThis trigger fires when your Wyze Switch is turned on.
- New KumoApp messageThis Trigger fires every time a specific KumoApp produces a log message with KumoApp.Log call with a specific type.
- Switch turns offThis trigger fires when your Wyze Switch is turned off.
- Update receivedThis Trigger fires every time a temperature/humidity/lux update is received from specified sensor/tag(s).
- Switch is double pressedThis trigger fires when your Wyze Switch is pressed.
- Too brightThis Trigger fires when a specified tag senses that its ambient light exceeds an upper threshold configured at light options screen inside the WirelessTag app. For example, this can be used to detect fridge door open.
- Switch is triple pressedThis trigger fires when your Wyze Switch is triple pressed.
- Too darkThis Trigger fires when a specified tag senses that its ambient light exceeds an lower threshold configured at light options screen inside the WirelessTag app. For example, this can be used to turn on a light in a room.
- Switch is hold pressedThis trigger fires when your Wyze Switch is hold pressed.
- Brightness returns to normalThis Trigger fires when a specified tag senses that its ambient light intensity returns between the upper and lower thresholds configured at light options screen inside the WirelessTag app.
Queries (With)
- Current Tag StateThis query returns specified door/window sensor/tag's current state, including temperature, humidity/lux (when available) and motion state such as door open/close, moved, or detected motion (for PIR sensor)
- History of plugs turned onThis query returns a list of instances when a Wyze Plug was turned on.
- Current Tag Manager StateThe query returns if the specified tag manager is online or offline, as well as how many hours it has been online.
- History of Smoke alarm alertsThis query returns a list of times when a Wyze Cam detected a smoke alarm. The minimum firmware version required is v3.9.3.62 for v1 and v4.9.1.60 for v2.
- History of temperature returning to normalThis query returns a list of when the specified tag sensed that its ambient temperature had returned between the upper and lower thresholds configured on the temperature options screen inside the WirelessTag app. Note: this query will only return future e
- History of Sound detected alertsThis query returns a list of events when a Wyze Cam detected sound. The minimum firmware version required was v3.9.3.62 for v1 and v4.9.1.60 for v2.
- History of tag manager offlineThis query returns a list of when the server detects that specified tag manager lost Internet connection due to power outage or Internet connection problems.
- History of Contact Sensor closesThis query returns a list of when a Contact Sensor closes.
- History of when temperature was too lowThis query returns a list of when a specified tag sensed that its ambient temperature fell below a threshold. Note: this query will only return future events after this Applet is created.
- History of Motion Sensor becomes clearThis query returns a list of when a Motion Sensor becomes clear.
- History of High Temperature alertsThis query returns a list of times when a specified tag senses that its ambient temperature exceeded an upper threshold configured at temperature options screen inside the WirelessTag app. Note: this query will only return future events after this Applet
- History of Motion Sensor detects motionThis query returns a list of when a Motion Sensor detects motion.
- History of humidity or moisture is too highThis query returns a list of when a specified tag with humidity or moisture monitoring enabled, detects "too wet" state.
- History of Contact Sensor opensThis query returns a list of when a Contact Sensor opens.
- History of when the tag manager was onlineThis query returns a list of when the specified tag manager was back online.
- History of motion being detectedThis query returns a list of when a Wyze Cam detected motion. The minimum firmware version required is v3.9.3.62 for v1 and v4.9.1.60 for v2.
- History of sensor no longer detects waterThis query returns a list of when specified water sensor tag transitions from detected water state to not detected water state, or when you open circuit its tip.
- History of a Wyze Bulb turning offThis query returns a list of when a Wyze Bulb is turned off.
- History of tag movesThis query returns a list of when specified motion sensor tag(s) armed in motion detection mode, have moved.
- History of tag out of rangeThis query returns a list of when a specified tag goes out of range. Note that the system can only determine whether a tag was out of range, if the "auto-update" was enabled.
- History of motion sensor has timed outThis query returns a list of when specified PIR KumoSensor or regular motion sensor tag detects no movement for a time-out period.
- History of update receivedThis query returns a list of when a temperature/humidity/lux update was received from specified sensor/tag(s).
- History of door or window is openedThis query returns a list of when a specified motion sensor tag(s) or reed sensor(s) detect that a door or window was open.
- History of too brightThis query returns a list of when a specified tag senses that its ambient light exceeds an upper threshold configured at light options screen inside the WirelessTag app. Note: this query will only return future events after this Applet is created.
- History of door or window is closedThis query returns a list of when a specified motion sensor tag(s) or reed sensor(s) detect that a door or window was closed.
- History of KumoApp messagesThis query returns a list of every time a specific KumoApp produces a log message with KumoApp.Log call with a specific type.
Actions (Then that)
- Turn on notificationsThis action will turn on notifications for your camera alerts.
- Beep a tagThis Action will beep the tag. NOTE: Only compatible with the Motion Sensor Tags with buzzer.
- Turn off notificationsThis action will turn off notifications for your camera alerts.
- Stop beeping a tagThis Action will stop the tag beeping. This action can also be used to test tag connectivity.
- Turn on deviceThis action will turn on your selected camera. The minimum firmware version required is v3.9.3.62 for v1 and v4.9.1.60 for v2.
- Turn on light or switchThis Action will turn on LED on the tag or a WeMo device.
- Turn off deviceThis action will turn off your selected camera. The minimum firmware version required is v3.9.3.62 for v1 and v4.9.1.60 for v2.
- Turn off light or switchThis Action will turn off LED on the tag or a WeMo device.
- Restart deviceThis action will restart your selected camera. This action does not apply to shared cameras. The minimum firmware version required is v3.9.3.62 for v1 and v4.9.1.60 for v2.
- Arm motion sensorThis Action arms motion sensor on a tag. Regular angle based motion sensor, Reed KumoSensor and PIR KumoSensor can all be armed using this action.
- Record a short video clipThis action will record an alert video and store it on the cloud. This action does not apply to shared cameras. The minimum firmware version required is v3.9.3.62 for v1 and v4.9.1.60 for v2.
- Disarm motion sensorThis Action disarms motion sensor on a tag. Regular angle based motion sensor, Reed KumoSensor and PIR KumoSensor can all be disarmed using this action.
- Enable motion detectionThis action will turn on your device's motion detection. This action does not apply to shared cameras. The minimum firmware version required is v3.9.3.62 for v1 and v4.9.1.60 for v2.
- Enable temperature monitoringThis Action will enable temperature monitoring on a tag.
- Disable motion detectionThis action will turn off your device's motion detection. This action does not apply to shared cameras. The minimum firmware version required is v3.9.3.62 for v1 and v4.9.1.60 for v2.
- Disable temperature monitoringThis Action will disable temperature monitoring on a tag.
- Unlock Wyze LockThis Action will unlock your Wyze Lock.
- Enable humidity or moisture monitoringThis Action will enable humidity or moisture monitoring on a tag. NOTE: Only compatible with Tags with humidity or moisture sensor.
- Lock Wyze LockThis Action will lock your Wyze Lock.
- Disable humidity or moisture monitoringThis Action will disable humidity or moisture monitoring on a tag.
- Turn plug onThis action will turn the plug on.
- Run a KumoAppThis Action will start a KumoApp installed under the current user account. If the KumoApp is running, nothing will happen. If a KumoApp does not register any event handler or timer, it will automatically stop after executing the first time, allowing this action to run multiple times without user intervention.
- Turn plug offThis action will turn the plug off.
- Stop a KumoAppThis Action will stop a KumoApp. If the KumoApp is not running, nothing will happen.
- Turn switch onThis action will turn on your Wyze Switch.
- Enable brightness monitoringThis Action will enable brightness/ambient light intensity monitoring on a tag. NOTE: Only compatible with Tags with ambient light sensor.
- Turn switch offThis action will turn off your Wyze Switch.
- Disable brightness monitoringThis Action will disable brightness/ambient light intensity monitoring on a tag.
- Turn bulb onThis action will turn the bulb on.
- Update Temperature/Humidity/LuxThis action will force an update to read the current temperature, humidity and ambient light (when available).
- Turn bulb offThis action will turn the bulb off.
- Set bulb brightnessThis action will change the brightness of the bulb.
- Change colorThis Action will change the color of your Wyze Bulb Color.
- Set bulb color temperatureThis action will change the color temperature of the bulb.
IFTTT helps all your apps and devices work better together